Order online or call: 520.325.3376  
Checkout Sign In  

SPL Transient Designer 4
Signal Processor

Item: SPL9942000

The Transient Designer 4 provides a revolutionary concept for dynamic processing rendering controls such as Threshold, Ratio and Gain superfluous. The Transient Designer's automation is highly developed, so that while the processing going on inside the box may be very complex, the user has to deal with just a few intuitive controls.
 
SPL's Differential Envelope Technology is the first analog solution for level-independent shaping of envelopes allowing transients to be accelerated or slowed down and sustain prolonged or shortened. The degree of dynamic processing required to do this couldn't be duplicated even using a chain of several conventional compressors, yet only two controls per channel are required to allow the user to completely reshape the attack and sustain characteristics of a sound. Attack can be amplified or attenuated by up to 15dB while Sustain can be amplified or attenuated by up to 24dB, enabling weak drum sounds to be made much more percussive and powerful, or for over-percussive transients to be softened. All necessary time constants (Attack, Decay and Release) are automated and optimised adaptively in a musical manner according to the characteristics of the input signal. This results in natural sounding signal processing and fast operation.

The Transient Designer 4 uses envelope followers to track the curve of the natural signal so that optimum results are guaranteed regardless of the input signal's dynamics. Because of the level-independent processing inherent in Differential Envelope Technology (DETª), manual threshold adjustments are not required. In order to maintain the cleanest possible signal path, the Transient Designer 4 uses the excellently specified THAT 2181-VCAs, which are especially natural sounding, transparent and create minimal distortion. High amplitudes are processed without damping of high frequencies or reducing bass. 


The Transient Designer 4 uses envelope followers to track the curve of the natural signal so that optimum results are guaranteed regardless of the input signal's dynamics. Because of the level-independent processing inherent in Differential Envelope Technology (DETª), manual threshold adjustments are not required. In order to maintain the cleanest possible signal path, the Transient Designer 4 uses the excellently specified THAT 2181-VCAs, which are especially natural sounding, transparent and create minimal distortion. High amplitudes are processed without damping of high frequencies or reducing bass. 

For stereo operation the Link function connects channel pairs (1 and 2 and/or 3 and 4). Linked channels are controlled by the same side-chain voltage so as to maintain a coherent and stable stereo image. When operating in Link-mode, the control elements of the first (or third) channel, including the Active switch, control the second (or fourth) channel, too.

Each channel is equipped with a relay hard bypass circuit to ensure a minimum signal path when the process is bypassed and to provide power fail safety. The Signal-LEDs allow to quickly monitor the signal flow, which is particularly important if the four channels are connected to a patchbay. The Transient Designer is fitted with XLR-connectors for balanced operation. To improve signal quality, SPL has developed a new hybrid-component balanced input/output stage using all laser-trimmed resistors with a tolerance of 0.01%. This approach has resulted in an exceptionally high CCMR (common mode rejection) better than -80dB at 1kHz.

 

Specifications:


     Input & Output

  • Instrumentation amplifier, electronically balanced (differential), transformerless
  • Nominal input level: +6dB
  • Input impedance: = 22kOhms
  • Output impedance: < 600Ohms
  • Max. input level : +24dBu
  • Max. output level: +22,4dBu
  • Minimum load ohms: 600Ohms
  • Relay Hard Bypass
  • Power Fail Safety

     Measurements

  • Frequency response: 20 Hz - 100 kHz
    (100 kHz = -3 dB)
  • CCMR (common mode rejection): - 80dBu @1kHz
  • THD & N: 0,004% @1kHz
  • S/N CCIR 468-3: -89dBu
  • S/N A-weighted: -105dBu

     Power Supply

  • Torroidal transformer: 15VA
  • Fuse: 315mA
  • Ground-Lift switch
  • Voltage selector

     Dimensions

  • Housing: Standard EIA 19"/1U, 482 x 44,45 x 237mm
  • Weight: 3,4 kg

Price: $1,649.00


 
Available for immediate shipping.
Includes FREE Ground Delivery
Ask a Question About...

SPL9942000 - Transient Designer 4
Signal Processor
Price $1,649.00

Your Name*

Email Address*  

Daytime Phone*

Ext.

Question:*

What is 5 plus 1 *

Cancel


Facebook Share Twitter Share Pin it Google +