KRK Ergo Room Correction System
Item: KRERGO
A great mix starts with a great recording room. But when it comes to achieving the most accurate mix, your room may have the upper hand. Like any room, your studio’s acoustics include offending frequencies and room reflections, and none of these are helping your mix. Getting a handle on these problems has traditionally meant the installation of soft foam or fabrics, and that’s a great start. But now you can get even closer to a perfect room, and a perfect mix, because the future of studio sound is here, and it’s called ERGO.
Specifications:
- Mechanicals
- Illuminated Controls
- Measurement Output
- Headphone Output
- Processing
- 400MHz Blackfin DSP
- RoomPerfect Algorithm Sample Rate - 96KHz
- Room Correction Frequencies 20-500Hz
- 1024 tap FIR filter for room correction
- Dimensions
- ERGO: 180mm (7") x 55mm (2.2") x 107mm (4.2")
- Microphone Length: 197mm (7.75")
- System Requirement
- PC - Windows XP 32-Bit (SP2 or later) or Windows Vista 32-Bit, 1GB RAM, 10MB hard disk space, 800x600 monitor resolution (or higher), 4 or 6-pin FireWire port (6-pin port required to FireWire to supply power to ERGO), AC outlet (for ERGO power supply if power is not supplied via FireWire).
- Mac – Minimum Mac OSX 10.5.x, 1GB RAM, 10MB hard disk space, 800x600 monitor resolution (or higher), 4 or 6-pin FireWire port (6-pin port required to FireWire to supply power to ERGO), AC outlet (for ERGO power supply if power is not supplied via FireWire).
- Audio Spec
- A/B Speaker Select/Control
- Stereo Audio-inl
- S/PDIF In (32KHz-96KHz)
- 118db SNR, THD+N -100dB