Whirlwind IMP2 Passive Direct Box
Item: WWIM2
Built rugged on the inside and outside, this is the world famous DI found in pro systems everywhere. The IMP 2 converts a line or instrument level unbalanced signal to a low impedance mic level balanced signal. Professional results in an economic package.
Whirlwind IMP2 Passive Direct Box
Features:
- 1/4" parallel wired in/out jacks: Two 1/4” jacks which provide the means to input and “loop through” the source signal. These jacks are wired in parallel, it makes no difference which one is used for input or output.
- Ground Lift switch to help isolate hum and buzz: Disconnects the ground between the input and the XLR output when set to the “LIFT” position. Ground remains connected when set to the “GND” position.
- Uses Whirlwind's TRHL transformer
Specifications:
- Impedance Ratio (input to output): 133:1
- Frequency Response: 20Hz-20kHz ±1dB
- Level Change: (input to output): -20dB