Reverend Pete Anderson Satin Vintage Clear
Item: RVPA1VC
Reverend Pete Anderson Satin Vintage Clear
Item: RVPA1VC
Reverend teamed up with country/roots-rock guitar legend and Grammy winning artist/producer Pete Anderson for our first hollowbody. Pete wanted a vintage look, but with upgraded performance that today's players would appreciate. The satin finish and vintage appointments project a low key "pawnshop prize" look that belies the guitars high performance design... kind of like an old sleeper street rod with a hidden nitrous tank! All the growl and twang you'd expect from a P-90 loaded hollowbody, but with key improvements.
Reverend Pete Anderson Satin Vintage Clear
Features:
- UNI-BRACE: this is a new single brace structure that starts at the neck block and ends with a block under the bridge. It is the full depth of the body, but only about a 1/2 inch wide, and runs under the bass side of the body only. The Uni-Brace creates several advantages:
- 1) Divides the body which reduces internal air movement, greatly reducing uncontrollable feedback at stage volume.
- 2) Connects the bridge block to the neck block, greatly increasing sustain. This also increases structural integrity, preventing the neck from tilting upwards over time (a common problem with conventional hollowbodies).
- 3) Stiffens the bass side of the body, which reduces uncontrollable howling and increases clarity of the low strings.
- 4) Does all of the above, and still delivers classic full-hollow tone!
- PLAYABILITY: the neck joins the body at the 15th fret for better high fret access.
- TUNING STABILITY: The bridge is mounted directly to the top... no more sliding bridge base! The bridge uses low-friction roller saddles, and locking tuners are standard.
- BASS CONTOUR: Like all Reverend guitars, this one features our Bass Contour control for on-the-fly versatility and tone tweaking.
Specifications:
- BODY: Hollow (Uni-Brace), laminated spruce top, laminated maple back/sides, bound f-holes, arched top/back. Clear top/back/sides with cream binding. 20" x 16-1/4" x 2-3/8".
- PICKUPS: Two Reverend P90's, output/tone calibrated for each position. Hum cancelling when combined.
- NECK glued-on, three-piece korina, 13 degree tilt-back headstock.
- TRUSS ROD dual-action, access at headstock.
- SCALE 24-3/4".
- FINGERBOARD rosewood, 12" radius, single-layer binding, pearloid block inlays.
- FRETS 22 Medium Jumbo.
- NECK PROFILE medium oval.
- NUT 1-11/16" (42.86 mm) width, graphite.
- TUNERS Reverend Pin-Lock Tuners.
- BRIDGE TOM w/ roller saddles, and Bigsby B70 tremolo.
- CONTROLS custom volume & tone, Bass Contour, 3-way.