QSC RMX1850HD Power Amplifier
Item: QSRMX1850HD
The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched performance at a breakthrough price. And with QSC's free 6 year warranty, the RMX is an even better value.
Muscular Power Plant
The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2 ohm speaker loads.
Superior Performance
RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16" deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.
QSC RMX1850HD Power Amplifier
Features:
- The RMX 1850HD provides improved thermal performance that gives you higher continuous power in 2 ohms stereo or 4 ohms bridged applications (a RMX 1850HD exclusive!)
- Independent defeatable clip limiters reduce distortion without sacrificing peak performance.
- Selectable low-frequency filters boost system response, protect speakers and ensure low-end tightness by more precisely matching the amplifier's range to the loudspeakers.
- Barrier strip, XLR and 1/4" balanced inputs plus Speakon and binding post outputs provide easy connections.
- Low-noise variable speed fans with rear-to-front air flow keep amplifiers and racks cool.
Specifications:
- STEREO MODE (Both Channels Driven):
8 ohms
(FTC 20 Hz - 20 kHz, 0.1% THD): 350 W
(EIA 1 kHz, 0.1% THD): 360 W)
4 ohms
(FTC 20 Hz - 20 kHz, 0.1% THD): 550 W
(EIA 1 kHz, 0.1% THD): 600 W
2 ohms
(EIA 1 kHz, 1% THD): 900 W
- BRIDGE MONO MODE:
8 ohms
(FTC 20 Hz - 20 kHz, 0.1% THD): 1100 W
(EIA 1 kHz, 0.1% THD): 1200 W
4 ohms
(EIA 1 kHz, 1% THD): 1800 W
- Signal to Noise, 20 Hz-20 kHz:-100 dB
- Distortion (SMPTE-IM): Less than 0.03%
- Damping Factor: Greater than 300
- Weight: 44.5 lbs (20.2 kg)