BBE 882i Sonic Maximizer
Item: BB882I
The 882i Sonic Maximizer features dual-mono operation with balanced XLR inputs and outputs. It is designed for applications requiring low noise, high headroom and +4dBu input levels. Perfect applications for the 882i are professional recording studios, pro and semi-pro sound reinforcement, multitrack studios, cassette duplication, nightclub sound systems, and broadcast transmission.
The BBE high definition sound process compensates for phase and amplitude distortion, restoring the brilliance and clarity of the original content material. The BBE High Definition Sound process begins by applying a linear phase shift across the full frequency range of the signal, which allows the speaker system to reproduce the transients and harmonics in the correct order. The BBE process then compensates for speaker amplitude distortion by progressively boosting lower and higher frequencies, and doing so within the context of the phase correction process. This efficiently creates a fuller, richer sound without excess equalization.
BBE 882i Sonic Maximizer
Features:
- +4dBu balanced line (1/4" tip-ring-sleeve and XLR inputs and outputs)
- +23dBu headroom
- Active balanced outputs
- Hardwire bypass
- Bypass switch for comparison of processed to unprocessed signals.
Specifications:
- Frequency Response, Process Mode: Program controlled
- Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 0dBu input
- Signal to Noise Ratio: 115dB Process IN
THD
- Process mode: less than 0.025% 20-20kHz
- Bypass mode: less than 0.002% 20-20kHz
- Maximum Output: +23dBu (may vary due to control settings)
- Input Impedance: 14.7K Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal
- Output Impedance: 600 Ohms, balanced 1/4" stereo phone jack or XLR jack. Pin #2 is the hot or "+" signal
- Sensitivity: -45dBu for maximum process
- Maximum Process: +12dBu boost at 5kHz, 0dBu input
- Lo Contour: +12dBu adjustment at 50Hz, 0dBu input