BBE 482i Sonic Maximizer
Item: BB482I
The BBE 482i Sonic Maximizer is perfect for home studios, DJ systems, PA systems, nightclub sound, and guitar, bass, or keyboard racks; any application not requiring balanced jacks. It provides processing for stereo or two separate mono channels. The BBE 482i adds brightness, clarity, and fullness to the sound. It features two five-segment LED output meters, +18dBu headroom, RCA and 1/4" inputs and outputs, and a bypass switch for comparison of processed to unprocessed signal. The BBE 482i Sonic Maximizer occupies only one rackspace.
The BBE high definition sound process compensates for phase and amplitude distortion, restoring the brilliance and clarity of the original content material. The BBE High Definition Sound process begins by applying a linear phase shift across the full frequency range of the signal, which allows the speaker system to reproduce the transients and harmonics in the correct order. The BBE process then compensates for speaker amplitude distortion by progressively boosting lower and higher frequencies, and doing so within the context of the phase correction process. This efficiently creates a fuller, richer sound without excess equalization.
BBE 482i Sonic Maximizer
Features:
- Two channels of process for stereo or separate mono mixes
- Five-segment LED output meters
- +18dBu Headroom
- RCA and1/4" inputs and outputs
- Hardwire bypass
- Bypass switch for comparison of processed to unprocessed signal
Specifications:
- Frequency Response, Process Mode: Program controlled
- Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 10dBu input
- Signal to Noise Ratio: 112dB Process IN
THD, Process mode: less than 0.025% at
20-20kHz
- Bypass mode: less than 0.002% at 20-20kHz
- Maximum Output: +18dBu (may vary due to control settings)
- Input Impedance: 47K Ohms, unbalanced 1/4" phone jack or RCA jack
- Output Impedance: 1K Ohms, unbalanced 1/4" phone jack or RCA jack
- Sensitivity: -45dBu for maximum process
- Maximum Process: +12dBu boost at 5kHz, -10dBu input
- Lo Contour: +12dBu adjustment at 50Hz, -10dBu input
|
|