DigiTech RP500 Integrated Effect Switching System
Item: DDRP500
Ever wish your pedalboard was "programmable"? Imagine having the ability to swap overdrives, try a different delay, chorus instead of flanger, etc... without having to actually remove and replace pedals and cables. How about a nice sparkling clean Fender amp tone when the chorus is on but a raunchy Marshall sound when the overdrive and delay are on? The DigiTech RP500 does all this and more.
The RP500 is the newest member of Digitech' s acclaimed RP Modeling Pedal line, boasting even more models, effects, and performance-friendly features sure to make it the center of your guitar rig! The RP500 acts like five separate stompboxes and effects, and a bypass mode lets you easily turn off all amp and cabinet sounds so you can focus on effects only. Built like a tank with nine vaccum-style switches, and a convenient ten-character LED display, you also get a built-in expression pedal to take control of your sound.
Of course none of these features would matter if the RP500 didn't sound incredible- and it does!
DigiTech RP500 Integrated Effect Switching System
Features:
- Tons of amp and cabinet models, stompbox models and effects
- 9 vacuum-style switches
- large, 10-charecter LED display
- Built-in Expression Pedal
- Pedalboard mode for switching between 5 effects
- Amp/Cabinet Bypass Mode
- USB Connectivity
- Comes with Cubase LE Software
- Includes X-Edit Editor/Librarian Software for programming/archiving presets
- Tap Tempo
- Tuner
- 24-bit A/D and D/A Converter / 44.1kHz
- 1 Audio DNA2 DSP Processors
- 99 User presets / 99 Factory presets
- USB 2.0
- Headphone outputs
- 19.5" W x 2.25" H x 8.75" D
- Minimum Windows Requirements: Vista Home/Premium XP Home/Professional (SP2 Installed, .Net 2.0 installed), Pentium/Athlon 1.4GHz or later, 512MB RAM (1GB recommended), 180MB hard disk space, DVD-ROM drive, USB port, Internet connection for Cubase activation
- Minimum Mac Requirements: OS 10.4x or later, PowerPC G4/G5 1GHz or later, 512MB RAM (1GB recommended), 180MB hard disk space, DVD-ROM drive, USB port, Internet connection for Cubase activation
Specifications:
- A/D/A Converter: 24-bit high performance audio
- Sampling Frequency: 44.1 kHz
- DSP Section: AudioDNA2™ DSP Processor
- Simultaneous Effects: 10
- Preset Memory: 1 00 User Presets (1-00) / 100 Factory Presets (F1-F00)
- Dimensions: 1 9.5? Length x 8.625? Width x 2.75? Height
- Unit Weight: 6.6 lbs.
- Analog Input Connections:
- Guitar Input: 1 /4? Unbalanced (TS)
Input Impedance: 500k Ohms
- CD/MP3 Input: 1 /8? Stereo (TRS)
- Analog Output Connections: 1/4? Outputs
- Left/Right Outputs: 1 /4? Impedance Unbalanced
- Left/Right Output Impedance: 500 Ohms per side
Maximum Output: +10 dBu XLR Outputs
- Left/Right Outputs: Balanced
- Left/Right Output Impedance: 1 kohm per side
- Maximum Output: +16 dBu
- Headphones: 1 /8? Stereo (TRS) – 13.6mW per channel @ 50 Ohms
- Digital Connections:
Universal Serial Bus (USB): Type B, supports USB1.1 Full Speed (12 Mbps Bandwidth USB 2.0 compatible)
RP500 USB
- Recording Specifications:
Sample Rate: 44.1 kHz
- Bit depth: supports 16-bit or 24-bit (depends on setup in Recording Software)
- Power Requirements:
US and Canada: 1 20 VAC, 60 Hz Adapter: PS0913B-120
Japan: 1 00 VAC, 50/60 Hz Adapter: PS0913B -100
Europe: 230 VAC, 50 Hz Adapter: PS0913B -230
UK: 240 VAC, 50 Hz Adapter: PS0913B -240
- Minimum Windows® PC Computer System Requirements:
Vista Home/Premium, XP Home/Professional (SP 2 installed, .NET Framework 2.0* installed)
800 MHz processor speed (1.2 GHz recommended)
512MB RAM (1GB recommended)
* .NET 2.0 will be installed during installation of X-Edit software if required on XP systems
- Minimum Mac Computer System Requirements:
OS 10.4.x, 10.5
PowerPC or Intel® G4, G5 processor 800 MHz (1.2 GHz
recommended)
512MB RAM (1GB recommended)
Includes:
- Power Supply
- Owner's Manual